Proper maintenance:
1. Check whether the zero line is accurate;
2. The workpiece should be wiped clean when measuring;
3. When the workpiece is large, it should be measured on the V-shaped iron or flat plate;
4. Wipe the measuring rod and anvil base before measurement;
5. Ratchet device is required when twisting the active sleeve;
6. Do not loosen the back cover to avoid changing the zero line;
7. Do not add ordinary oil between the fixed sleeve and the movable sleeve;
8. After use, wipe with oil, put in a special box and place in a dry place.
Other Products
Shrink chuck BT30 BT40 BT50 Heat expansion holder 04 06 08 10 12
Shrink chuck BT30 BT40 BT50 Heat expansion holder 04 06 08 10 12
CNC Machine Tool Holder Hydraulic Tool Holder BBT40 HDC20 Hydraulic Chuck
CNC Machine Tool Holder Hydraulic Tool Holder BBT40 HDC20 Hydraulic Chuck With D20 Hydraulic Collet
NC Tooling VDI Holder Radial toolholder B5 B6Type
NC Tooling VDI Holder B5 B6Type toolholder
BT30 BT40 BT50 HSK63 HSK100 Spindle test bar Spindle Drawbar Force Gauge Draw bar Puller test Gauge
BT30 BT40 BT50 HSK63 HSK100 Spindle test bar Spindle Drawbar Force Gauge Draw bar Puller test Gauge
ERH groove water stop cylinder clamp center cold water mechanical elastic jacket ER16 20 25 40 chuck
ERH groove water stop cylinder clamp center cold water mechanical elastic jacket ER16 20 25 40 chuck
High precision parallel block shim PB153-1/PB153-2
High precision parallel block shim PB153-1/PB153-2
Navigation
Navigation
Contact Us
Tel: +86 534 425 1888
Mob/WhatsApp/Wechat: +86 137 9138 1619
E-mail: jacksun@ht-tools.net
Add.:East Area of Economic Development Area, Pingyuan County, Shandong Province. China 253100
Send in Inquiry
Send in Inquiry
